The product is more complicated and the parts can fit to the adjacent parts with multiple constraints for improving the stiffness and accuracy of the assembly. The average dimension of the parts may shifts or drifts from the nominal value during the manufacturing process. And, the dimension distribution of the parts can be in different non- normal distribution since they are manufactured by different manufacture process. This method predicts more accurate resultants by an interpolation method. With this method, the assembled state of an assembly with multiple constraints can be evaluated. The assembly behaves a higher probability of stiffness, as if the minimum gap index is smaller. For the mean shift studied for the cases represented in...
ISBN: 978-3-8433-6986-2
Издательство:
Книга по требованию
Дата выхода: июль 2011
This book has tried to address the problem of discontinuous electricity supply in a situation where continuous electricity supply through main grid is not possible or difficult. A new solar system, has been proposed in this book which is mainly the consists of pv module and battery system.The proposed system consists of four functional unity. These are PV panel, Charge Controller, Battery system and backup generator system. The solar system which has been proposed in this book is helpful for Islands and naturally abrupt regions and it is a great blessings for the people of remote location for telecommunication purposes.This book also offer the low cost design of solar system and comparison study of the different types of battery with...
ISBN: 978-3-6393-3240-7
Издательство:
Книга по требованию
Дата выхода: июль 2011
The aim of this research work is to develop a highly efficient process environment for the production of PET bottles. The ingenious process design carried out includes optimization of both the preheating stage of the process and PET preform shape. The heating of the PET preform is conducted using microwave. Dielectric properties of the PET preform, measured in this work, are used for designing microwave applicators. Studies into heat transfer were conducted by measuring temperature rise and temperature distribution during heating. A remarkable achievement is presented showing that PET preforms can be heated at least 5 times faster and more efficiently by microwave power. The results indicate that the designed cylindrical cavity works...
ISBN: 978-3-6392-2465-8
Издательство:
Книга по требованию
Дата выхода: июль 2011
Coloured conducting textiles have shown a wide range of potential applications in heating fabrics, electromagnetic wave absorption, and wearable optoelectronic devices. This research aimed at clarifying some issues occurred in the research project on coloured conductive textiles. The investigation firstly clarified a possible chemical reaction that took place between a commercial dispersing dye (Terasil Red G) and the conducting polymer polypyrrole, through chemical separation, structural identification and spectrum characterisations. Then, a series of acidic dyes were introduced into polypyrrole matrix during the vapour coating of conducting polymer on the wool fabrics. Colour and thermal stability studies were conducted. Finally, the...
ISBN: 978-3-8433-7513-9
Издательство:
Книга по требованию
Дата выхода: июль 2011
Papita Saha, Shamik Chowdhury, Prof. Siddhartha Datta
India is the home to more than 500 flowering plants that can yield dyes. Though there is a large plant resource base, little has been exploited so far. “An Introduction to FLORAL DYES” provides a precise technical knowledge about some of these flowering plants along with the basic principles of extraction and application of the floral dye in Textile Industry and in Powder - Gulal Industry. These floral dyes are non toxic, non allergic to human skin, easily available and more economical. Some natural dye sources produce truly exquisite shades and are more economical to purchase than synthetic dyes. The process of extraction of dye is economically viable as the raw materials are available at low cost. This technology can be used in...
ISBN: 978-3-8433-7025-7
Издательство:
Книга по требованию
Дата выхода: июль 2011
The greatest demand facing the automotive industry has been to provide safer vehicles with high fuel efficiency, at minimum cost. Current automotive vehicle structures have a fundamental handicap: a short crumple zone for crash energy absorption. An innovative inflatable bumper concept called the “I-bumper,” has been developed in this research to improve the crashworthiness and safety of military and commercial vehicles. The I-bumper has several active structural components, including a morphing mechanism, a movable bumper, two explosive airbags, front posts filled with granules, and a morphing lattice structure with a locking mechanism that provides desired rigidity and energy absorption capability during a crash. An analytical...
ISBN: 978-3-6391-0223-9
Издательство:
Книга по требованию
Дата выхода: июль 2011
This book covers an important topic from the field of intelligent transportation systems - highway management and control. It introduces a concept of highway viewed as a controlled system and describes the significant features from the superordinate control theory. Next, a modular control system is proposed, which follows the theory described above and aggregates interdisciplinary research into one advanced management system. The proposed structure can be used in different scenarios and enables optimal usage of particular modules. The proposed modules are described as part of the next section and for each, author’s experiences are used to demonstrate its focus. Finally, the next steps and author’s future research are described to...
ISBN: 978-3-6392-4073-3
Издательство:
Книга по требованию
Дата выхода: июль 2011
This state-of-the-art work reviews the sulphide scavenging technology and discusses the laboratory evaluation to field application of two scavengers in water-base drilling fluids. Parameters that affect the reliability of these materials for removing sulphides and that of corrosion control effects on the drill pipes are emphasized. Practical problems of scavengers use, such as effects on mud performance, how to add the scavenger to mud, and the health, safety and environmental (HSE) aspects of the scavengers are considered to improve or accelerate the implementation of environmental strategies. This book has been written to assist both the novice and the experienced technical professional in drilling fluid technology. Emphasis is placed...
ISBN: 978-3-6392-3146-5
Издательство:
Книга по требованию
Дата выхода: июль 2011
The aim of this book is to evaluate and compare various methods for Heart Rate Variability analysis and to present the steps of the algorithm designed to perform temporal and spectral analyses of the recorded signals. The graphical representation, accompanied by the set of Heart Rate Variability parameters ready to be interpreted by the doctor, is to be helpful in identification of the cardiac ailment. Данное издание не является оригинальным. Книга печатается по технологии принт-он-деманд после получения заказа.
ISBN: 978-3-8383-7236-5
Издательство:
Книга по требованию
Дата выхода: июль 2011
This study analyzes urban freight distribution from the wholesale distribution sector to supermarkets' retail sector via TransCAD software, and the vehicle routing problem with time windows has been applied for possible delivery route optimization. TransCAD focuses on a transport system based on graph theory concepts which have been employed in this study, together with some basic concepts of distribution chain and its elements. Some parameters for the application of TransCAD have been based on information provided by a wholesale distribution company located in Uberlandia, Brazil. Such information includes vehicle type, fleet size, and average client demand. The features of the vehicle type underwent changes in four different scenarios;...
ISBN: 978-3-8433-8591-6
Издательство:
Книга по требованию
Дата выхода: июль 2011
The main content of the book is energy stategy and - policy.The goal of the work is to analyse the strategic problems of energy supply and perspectives of energy development in a long-term time period (50- 70 years forward).In this book is not proceeded from the nowadays environmental policy that at present occurs a global climate warming, but from the possibilities of continue consumers supplying with energy and the real possibilities to degrease the environmental pollutions in the long-term future. The following problems in this book: energy and environment, consumption and reserves of primary energy, electricity generation and power systems, innovation role in energy engineering, energy development long-term perspectives in Estonia....
ISBN: 978-3-8433-5089-1
Издательство:
Книга по требованию
Дата выхода: июль 2011
Well productivity is one of primary concerns in field development and provides the basis for field development strategy. The primary focus of this book is to derive productivity formulae for oil wells in anisotropic reservoirs using straightforward mathematical techniques. Pressure transient analysis methods presented in this book are based on analytical solutions of the various forms of flow equation. It is the authors' opinion that the distinct advantage of the analytical methods is in their simplicity and the ability to identify correctly the main physical features of a given system. The analytical approach should be considered as an initial and necessary step by which the system is identified and first estimates of parameters are...
ISBN: 978-3-6391-0320-5
Издательство:
Книга по требованию
Дата выхода: июль 2011
Cavitation is an extremely attractive option to improvise the efficacy of conventional unit operation and unit processes, for its ability to provide energy in concentrated form and at the location of transformation. Cavitational reactors have tremendous market potential for applications ranging from synthesis of biodiesel to specialty chemicals and from effluent treatment to process applications like online mixing. This book explains the working of various cavitational reactors and gives guidelines for its efficient operation and scale-up. This book outlines bubble dynamics models, hydrodynamics models (CFD) and kinetic models for hydrodynamic and acoustic cavitational reactors, to quantify the extent of cavitationally induced microbial...
ISBN: 978-3-6392-8675-5
Издательство:
Книга по требованию
Дата выхода: июль 2011
well this book covers the faults on a three phase transmission line using simulink tool of matlab. after going through the book, you ll be able to understand the various tools used, the basic parameters and their variation.The most important thing covered in this book is the graphical representation of the Voltage and Current Waveforms during Fault cases.this will help you understand the numerical analysis of faults more clearly. Данное издание не является оригинальным. Книга печатается по технологии принт-он-деманд после получения заказа.
ISBN: 978-3-6392-9545-0
Издательство:
Книга по требованию
Дата выхода: июль 2011
In der vorliegenden Diplomarbeit wurde analysiert, ob das auf Leihbasis angeschaffte Indoor-GPS-System der Firma Arc Second Incl.im Rahmen eines Forschungsprojektes fur zukunftige Aufgaben einer kontinuierlichen Prozessuberwachung bei Airbus Hamburg eingesetzt werden kann. Derzeit besteht keine Aussagemoglichkeit gegenuber kurzzeitigem, prozessrelevantem Veranderungsverhalten der Bauteile und beteiligter Fertigungsmittel. Eine permanente Uberwachung diskreter Geometriepunkte oder Konturen ist durch das Indoor-GPS-Konzept vorstellbar. Zu diesem Zweck wurden Untersuchungen und Anwendungstests u.a.in der Produktionsumgebung der A 380 - Rumpfmontage durchgefuhrt. Diese dienen der Bewertung der Handhabung, Bediensicherheit, Betriebsstabilitat...
ISBN: 978-3-6390-4952-7
Издательство:
Книга по требованию
Дата выхода: июль 2011
Turbulence exists in almost all real flow problems; and its modeling is one of the major concerns in modern aerodynamics and in many engineering flows. This project shares equally the features of aerodynamics as well as CFD and is about modeling of external compressible flow over a body (airfoil) using one of the turbulence modeling techniques (i.e. Spalart-Allmaras 1 Equation model) in CFD. The computational domain has been generated in 2D by the use of Gambit which is Fluent's geometry and mesh generation software. The generated mesh was then successfully exported to Fluent solver where the flow over the body (airfoil) was simulated using turbulence model Spalart-Allmaras (1-Eqn) for different angle of attacks and different Mach...
ISBN: 978-3-8383-3443-1
Издательство:
Книга по требованию
Дата выхода: июль 2011
Frederic P. Miller, Agnes F. Vandome, John McBrewster
Animal repellents are products designed to keep certain animals away from objects, areas, people, plants, or other animals. Данное издание не является оригинальным. Книга печатается по технологии принт-он-деманд после получения заказа.
ISBN: 978-6-1306-9207-0
Издательство:
Книга по требованию
Дата выхода: июль 2011
Frederic P. Miller, Agnes F. Vandome, John McBrewster
High Quality Content by WIKIPEDIA articles! Une antenne-relais (ou station de base) de telephonie mobile est un emetteur-recepteur de signaux electrique de communication mobile qui convertit des signaux electriques en ondes electromagnetiques (et reciproquement). Le terme "antenne-relais" designe frequemment les antennes de telephonie mobile, car elles constituent (associees aux emetteurs) la base des reseaux cellulaires et est largement le type d'antenne-relais le plus frequent. Les premieres antennes-relais apparurent en France en 1956 avec le premier systeme de telephone dans des vehicules (systeme rudimentaire avec operatrices). Les antennes-relais du premier reseau cellulaire francais sont installees en 1985, il s’agissait du...
ISBN: 978-6-1308-0252-3
Издательство:
Книга по требованию
Дата выхода: июль 2011
Bomb is one of the favored weapon of terrorists for destroying and disrupting operations.Since the series of bomb attacks after nine eleven on various buildings of the world, research and development of antiblast material becomes a demand.keeping in view that need, in this book a polymeric nano material is prepared, tested and compared with the materials used usually for the purpose of blast resistance.Castor oil and HTPB based Polyurethanes samples are prepared and tested for microphase segregation,tensile strenght,modulus,Tg with UTM,DMTA and Autodyne simulation.Selected antiblast polymer shows higher values of tensile strenght and lower Tg without sacrifycing the elongation values so shows to be a better blast resistance nano polymer...
ISBN: 978-3-6392-7966-5
Издательство:
Книга по требованию
Дата выхода: июль 2011
Man schatzt, dass jahrlich 80.000 Menschen in Deutschland neu an dieser Sprachstorung erkranken (80% durch Schlaganfalle). Aphasiker haben Schwierigkeiten im Ausdrucken eigener Gedanken und Gefuhle. Sie konnen oft das eigene Gesprochene nicht selbst kontrollieren. Konnen manchmal nicht verstehen, nicht lesen oder nicht schreiben oder nicht rechnen. Sind oft rechtsseitig gelahmt, mussen daher alle Tatigkeiten mit der linken Hand neu lernen (besonders das Schreiben). Birthe Wilagi betrachtet in ihrem Buch diesen Bereich theoretisch wie praktisch und beschreibt anhand eigener Erfahrungen: Hirnblutung mit 22. Auf einmal ist alles anders. Wieder neu Schreiben lernen, statt auf Partys zu gehen. So schnell wie moglich wieder raus aus dem...
ISBN: 978-3-6390-9116-8
Издательство:
Книга по требованию
Дата выхода: июль 2011
In Computer Vision,Image Processing, Artificial Intelligence and Neural Networks object recognition is one of the most successful applications of image or object analysis and understanding.The recognition system typically involves some sort of sensor,the use of a model database in which all the objects “models” representations are saved,and a decision-making ability.When a sensor views an object the digitized image is processed so as to represent it in the same way as the models are represented in the databases.Then a recognition algorithm tries to find the model to which the object best matches.For the view-based recognition, the representations take into account the appearance of the object. To achieve 3D Object recognition(3DOR)...
ISBN: 978-3-8433-9115-3
Издательство:
Книга по требованию
Дата выхода: июль 2011