Please note that the content of this book primarily consists of articles available from Wikipedia or other free sources online. In engineering, woodworking and construction, a nail is a pin-shaped, sharp object of hard metal or alloy used as a fastener. Formerly wrought iron, today's nails are typically made of steel, often dipped or coated to prevent corrosion in harsh conditions or improve adhesion. Ordinary nails for wood are usually of a soft, low-carbon or "mild" steel (about 0.1% carbon,...
Please note that the content of this book primarily consists of articles available from Wikipedia or other free sources online. In engineering, woodworking and construction, a nail is a pin-shaped, sharp object of hard metal or alloy used as a fastener. Formerly wrought iron, today's nails are typically made of steel, often dipped or coated to prevent corrosion in harsh conditions or improve adhesion. Ordinary nails for wood are usually of a soft, low-carbon or "mild" steel (about 0.1% carbon, the rest iron and perhaps a trace of silicon or manganese). Nails for concrete are harder, with 0.5-0.75% carbon. Nails are typically driven into the workpiece by a hammer, a pneumatic nail gun, or a small explosive charge or primer. A nail holds materials together by friction in the axial direction and shear strength laterally. The point of the nail is also sometimes bent over or clinched after driving to prevent loosening.
Данное издание не является оригинальным. Книга печатается по технологии принт-он-деманд после получения заказа.
Освещены свойства и особенности применения аналоговых и аналого-цифровых интегральных микросхем: операционных усилителей, компараторов, таймеров, фильтров, линейных и импульсных стабилизаторов напряжения, коммутаторов, микросхем АЦП и ЦАП различных датчиков. В книге нашли отражение последние достижения в элементной базе, при этом основное внимание уделено схемотехнической реализации различных...
Оставить комментарий