High Quality Content by WIKIPEDIA articles! A radar system uses a radio frequency electromagnetic signal reflected from a target to determine information about that target. In any radar system, the signal transmitted and received will exhibit many of the characteristics described below. The diagram below shows the characteristics of the transmitted signal in the time domain. Note that in this and in all the diagrams within this article, the x axis is exaggerated to make the explanation clearer....
High Quality Content by WIKIPEDIA articles! A radar system uses a radio frequency electromagnetic signal reflected from a target to determine information about that target. In any radar system, the signal transmitted and received will exhibit many of the characteristics described below. The diagram below shows the characteristics of the transmitted signal in the time domain. Note that in this and in all the diagrams within this article, the x axis is exaggerated to make the explanation clearer. The carrier is an RF signal, typically of microwave frequencies, which is usually (but not always) modulated to allow the system to capture the required data. In simple ranging radars, the carrier will be pulse modulated and in continuous wave systems, such as Doppler radar, modulation may not be required. Most systems use pulse modulation, with or without other supplementary modulating signals. Note that with pulse modulation, the carrier is simply switched on and off in sync with the pulses; the modulating waveform does not actually exist in the transmitted signal and the envelope of the pulse waveform is extracted from the demodulated carrier in the receiver.
Данное издание не является оригинальным. Книга печатается по технологии принт-он-деманд после получения заказа.
Оставить комментарий